FreeRTOS For TI Embedded MCUs
Introduction
This page links to documentation pages for the most up-to-date RTOS projects
that target Texas Instruments embedded processors. Links to older RTOS projects
can be found on the main RTOS ports page.
MSP432 (ARM Cortex-M4F core)
Supporting IAR, ARM (Keil), and TI (CCS) compilers
The MSP-EXP432P401R LaunchPad Development Kit
This page documents the demo application that targets the
Texas Instruments MSP432 microcontroller
- which is a variant of the MSP430 low power microcontroller
that uses an ARM Cortex-M4F core.
Pre-configured MSP432 projects that target the MSP432P401R Launchpad Development
Kit are provided for the IAR, ARM and TI (CCS) compilers.
Each project can be compiled to create either a simple blinky demo,
or a comprehensive test and demo application.
The comprehensive demo uses FreeRTOS-Plus-CLI
to create a simple command line interface through a UART.
The blinky demo uses FreeRTOS's tickless idle mode to reduce power consumption.
MSP430FR5969 (MSP430X core)
Supporting IAR, and TI (CCS) compilers
The MSP-EXP430FR5969 LaunchPad Development Kit
This page documents the RTOS demo
application that targets the
Texas Instruments MSP430FR5969
low power microcontroller, which has a 16-bit MSP430X core.
Pre-configured projects that target the
MSP-EXP430FR5969 Launchpad Development
Kit are provided for both the IAR
and Code Composer Studio (CCS) MSP430 compilers:
Each project can be compiled to create either a simple blinky demo,
or a comprehensive test and demo application that includes a
FreeRTOS-Plus-CLI
command line interface. Further, build configurations are provided that use both
the large and small data models.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.