Hi, I’m woking with STM32L486RG MCU using IAR v7.4 IDE. In my poject , I’m required to implement an FTP server on my SD card **using the **FreeRTOS+ library. For the internet connection , I’m using the WINC1500 module of ATMEL. When I started the integration of the FreeRTOS +, I found that there are files called “FreeRTOS_sockets.c” and “FreeRTOS_sockets.h” and I start to be a little bit confused whether these files use my** WINC1500 socket** or they use and create another socket type. Currently in my project, I have an MQTT client implemented and it uses the WINC1500 socket. So, if I want to implement the FTP server , should I use the some socket of my WINC1500 module or let the FreeRTOS_sockets files use their own ? Sorry , but I’m in urgent need for help because I’m getting lost and I don’t really find enough information about this issue on the net. Thanks in advance !

Hi again, maybe the good question is : how to tie my winc1500 module and the freertos socket ? kind and best regards, Dhibi

I’m afraid I don’t know anything about the WINC1500, but a quick look at information on the Internet leads me to the conclusion that the device has the TCP/IP stack on board, and provides access through a serial interface – so I’m not sure it is intended for use with a source code TCP/IP stack.