NetworkBufferDescriptor_t *pxGetNetworkBufferWithDescriptor( size_t xRequestedSizeBytes,
TickType_t xBlockTimeTicks );
Data that is sent out to the network or received from the network is
stored in a network buffer. A network buffer is basically just a block
of RAM (actually an array of uint8_t in the source code).
The embedded TCP/IP stack needs to first locate the network buffers, and
once located know how big the network buffers are. Network buffer
descriptors are used for that purpose.
pucPayloadBuffer points to the start of the network buffer.
xDataLength holds the size of the buffer in bytes, excluding the Ethernet CRC bytes.
More information is provided on the page that
network buffer descriptordescribes how to port
FreeRTOS+TCP to new devices.
pxGetNetworkBufferWithDescriptor() Obtains a network buffer and associated network buffer descriptor. If
xRequestedSizeBytes is 0 then a network buffer descriptor is obtained
by itself - without a network buffer.
pxGetNetworkBufferWithDescriptor() must not be called from an interrupt service routine (ISR).
The total number of network buffer descriptors is set by
The size of the Ethernet buffer to obtain and reference
from the returned network buffer descriptor. The size
is specified in bytes.
If xRequestedSizeBytes is zero then the returned network
buffer descriptor will not reference an Ethernet buffer
(the reference is set to NULL).
If a network buffer is not available then the calling RTOS task
will be held in the Blocked state (so other tasks can
execute) until either a network buffer becomes available
or the specified block time expires.
The block time is specified in RTOS ticks. To convert
a time specified in milliseconds to a time specified in
RTOS ticks divide the time specified in milliseconds by
Successful calls return a pointer to the obtained network buffer
descriptor. Unsuccessful calls return NULL.
Examples are provided on the
Porting FreeRTOS to a Different Microcontroller
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.