Download FreeRTOS
 

Quality RTOS & Embedded Software

COMMUNITY
WHAT'S NEW
Simplifying Authenticated Cloud Connectivity for Any Device.
How Wi-Fi and Cellular connectivity modules with ExpressLink can help create secure cloud connected devices. See the blog post.
Designing an energy efficient and cloud-connected IoT solution with CoAP.
A client/server, request/response, UDP-based protocol for efficiency and cloud compatibility. See the blog post.
Introducing FreeRTOS Kernel version 11.0.0:
A Major Release with Symmetric Multiprocessing (SMP) Support. See the blog post.
FreeRTOS Roadmap and Code Contribution process.
The FreeRTOS roadmap and code contribution process are now published here and on GitHub. See the blog post.
OPC-UA over TSN with FreeRTOS.
A development project to give applications consistent access to hardware TSN capabilities. See the blog post.

Step 3: Creating a New STM32CubeMX Project

The STM32CubeMX start screen includes a link (and menu items) to start a new project. The new project dialogue is very intuitive. On one tab it allows you to select an STM32 part number and displays the memory and features of the selected part. On another tab it allows you to select a standard evaluation, discovery or STM32 Nucleo board.

Workflow steps:
  1. Click the "New Project" link. A "New Project" dialogue box will appear.

  2. Select an MCU part number. The dialogue will automatically grey out the peripherals that are not available for the selected part.

    In writing this example an STM32F439 part was selected in a BGA package.

  3. For each peripheral of interest, either check the box or enter the number of peripherals of that type to be used. It is not possible to check the boxes of peripherals that do not exist on the selected MCU part, or enter a number that exceeds the number of a peripheral actually available on the selected MCU part.

  4. Once both the MCU part number and the peripherals of interest have been selected, click "Ok" to close the new project dialogue and see the main design window.
Click images to enlarge

Start screen
New project dialogue
With part selected
Selecting peripherals


The main design window has four tabs: Pinout, Clock Configuration, Configuration, Power Consumption Calculator.


>> On to step four
<< Back to the STM32CubeMX practical walk-through index

Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.